Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Henderson, NC

Linear Opener Circuit Board Replacement in Henderson, NC

Failed logic boards and receivers replaced, often after a power surge. Typical cost $175-$400.

Garage doors rarely fail at a convenient time. If you need Linear opener circuit board replacement in Henderson, NC, we can often come out the same day when a technician is available. Failed logic boards and receivers replaced, often after a power surge. Whether your Linear opener is a few years old or a few decades, we can diagnose it and tell you honestly whether it is worth repairing. Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

When to call for Linear opener circuit board replacement

  • The opener is completely dead even though it has power
  • It worked until a storm or power surge
  • Random operation or no response to any control
  • Diagnostic lights showing a board fault

Why this happens

  • Power surges and lightning
  • Heat and moisture damage
  • Age

Before the technician arrives

  • Reset the breaker and try a different outlet.
  • Unplug the opener for a minute, then plug it back in.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle Linear opener circuit board replacement

  1. Confirm power and rule out sensors and controls
  2. Replace the logic board or receiver
  3. Reprogram remotes
  4. Set the limits and force
  5. Recommend surge protection

On older openers, a new opener can cost about the same as a board and adds current safety and security features.

Linear Opener Circuit Board Replacement cost in Henderson, NC

$175-$400Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Linear services

Linear Opener Circuit Board Replacement in Henderson, NC

A closed garage in a North Carolina summer gets very hot, which shortens the life of opener circuit boards, capacitors and photo-eye sensors. Storms add power surges, so a surge protector is cheap insurance.

Besides Henderson (ZIP codes 27536 and 27537), we handle Linear opener circuit board replacement in Oxford (10.7 mi), Franklinton (16.1 mi), Louisburg (16.8 mi) and Creedmoor (21.5 mi). Call (833) 435-8883 to book a visit in Henderson.

Linear Opener Circuit Board Replacement: frequently asked questions

How much does Linear opener circuit board replacement cost in Henderson, NC?

Linear Opener Circuit Board Replacement typically costs $175-$400 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Linear opener circuit board replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Linear opener circuit board replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Linear warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where North Carolina or Henderson requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Henderson, NC

Midland Garage Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Raynor Garage Door Repair

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $150-$450

Hörmann Weather Seal Replacement

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $100-$300

Sommer Garage Door Sensor Repair

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $100-$250

Richards-Wilcox Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Cornell Cookson Rolling Steel Door Repair

Cornell Cookson makes rolling steel service doors, security grilles and rolling fire doors.

Typical $300-$1,500

Carriage House Garage Doors

Carriage-style doors in steel, composite and wood, with decorative hardware.

Typical $2,000-$8,000

Windsor Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Overhead Door Garage Door Opener Repair

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $125-$350

Craftsman Remote & Keypad Programming

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $50-$150

LiftMaster Garage Door Sensor Repair

LiftMaster is the professional-installer brand of The Chamberlain Group. The color of the learn button on the motor unit shows which remotes are compatible (yellow on Security+ 2.0 models; purple, red, orange or green on older ones), and most current models work with the myQ app.

Typical $100-$250

Garaga Garage Door Track Repair

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $150-$400

Garage door stuck, noisy or broken?

Talk to a garage door technician in Henderson, NC now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote